Definition. Professional hair colouring covers three different chemistries: oxidative colour, in which colourless precursors form the dye inside the cortex in an alkaline medium with hydrogen peroxide; direct colour, in which ready-made dyes attach to the fibre; and lightening, which breaks down melanin by oxidation.
Key facts
- Oxidative colour: pH of about 9-10 at application.
- Hydrogen peroxide: at most 12% in hair products (Annex III of Regulation (EC) No 1223/2009).
- p-Phenylenediamine: at most 2% on the hair after mixing, with mandatory warnings.
- Ammonia: at most 6% calculated as NH₃.
- Henna lawsone: 2-hydroxy-1,4-naphthoquinone, C₁₀H₆O₃, 174 g/mol.
- The risk with peroxide comes from “compound” henna containing metal salts, not from pure henna.
Professional colouring keeps evolving: new alkalising agents, protective actives during lightening, more intense direct dyes. Hairswiss looks at these developments through the chemistry that makes them possible, not through aesthetic trends.
How Does Oxidative Colour Work?
Permanent colour relies on an oxidation and coupling reaction. Colourless precursors, the primary intermediates (such as p-phenylenediamine or toluene-2,5-diamine) and the couplers (resorcinol, m-aminophenol, 1-naphthol), penetrate the cortex swollen by the alkaline medium. Hydrogen peroxide oxidises the primary intermediate into a reactive species that couples with the coupler: dyes larger than the precursors form and remain trapped in the fibre. This trapping, not the breaking of disulphide bonds, is what makes the colour permanent. The same peroxide, in an alkaline medium, lightens the natural melanin.
How Do Direct Colours Work?
Semi-permanent colours and colour masks use ready-made dyes. Cationic dyes (Basic series) bind by electrostatic attraction to the negatively charged keratin; small nitro dyes (HC series) diffuse into the outer layers of the fibre. There is no irreversible chemical reaction, hence limited staying power, which depends on the size and charge of the dye and on the porosity of the hair: lightened hair, more porous and more anionic, takes up these dyes far more intensely.
Which Technical Developments Shape Colouring Today?
1. Protective actives during lightening
“Bond builders” are added to the lightener or applied straight afterwards. The best known are based on maleic acid or Bis-Aminopropyl Diglycol Dimaleate. Their makers state that they bind the thiol groups released during oxidation; several studies show less measured damage, but the exact mechanism is still debated. They do not rebuild disulphide bonds that have already been destroyed and do not replace a well-dosed lightening service.
2. Ammonia-free colours
Ammonia brings the mixture to pH 9-10: the fibre swells and the peroxide forms the perhydroxyl anion (HOO⁻), the species that oxidises melanin. “Ammonia-free” formulas mainly replace it with ethanolamine (MEA). They have little smell, but ethanolamine is not volatile: it stays longer in the fibre, and more of it is needed for the same lift. A study by Bailey et al. (2014) measured more damage with ethanolamine than with ammonia at maximum concentrations. “Ammonia-free” describes the alkalising agent, not gentleness.
3. Highly saturated direct dyes
Vivid colours (pink, blue, violet, green) rely on synthetic direct dyes: cationic azo dyes, triarylmethanes, anthraquinones and nitro dyes. They take far better on lightened hair and wash out over time, faster when the fibre is very porous.
4. Henna and plant dyes
Lawsone, the colouring principle of henna (Lawsonia inermis), attaches to keratin, notably by reacting with the nucleophilic groups of amino acids; the colour is very wash-resistant. Pure henna is hard to lighten or colour over, but the real danger comes from “compound” henna containing metal salts: with peroxide it can cause an exothermic reaction and severe breakage. A strand test is essential before any chemical service on hennaed hair. The “black henna” used for temporary tattoos often contains PPD and is a major cause of allergy.
5. Care built into the colour service
Salons increasingly build care steps before, during and after colour. Lightening and oxidative colour damage the cuticle and make the fibre more anionic; acidic, conditioning treatments after the service help close the fibre, smooth it and limit colour loss.
What the Professional Should Remember
- The higher the pH and the longer the processing time, the more the fibre is damaged, whatever the brand.
- Bond builders limit damage during the service; they do not repair hair that is already damaged.
- Compatibility between services (colour, henna, smoothing, perming) is a safety issue.
- Porosity must be assessed before every colour service: it decides the formulation and the risk of an uneven result.
For the chemistry of semi-permanent colour masks, see our analysis of cationic and nitro direct dyes.
Also on Hairswiss: p-Phenylenediamine (PPD) · Ethanolamine · Blue-violet pigments
Which Professional Treatment After Colouring?
Edelstein Regeneration Therapy Mask 175, available on cliCHair.ch, is a rinse-off mask for dry or sensitised hair. Its INCI list combines hydrolysed keratin (Hydrolyzed Keratin), Sodium Hyaluronate, Polyquaternium-55 and aloe vera juice with a Cetearyl Alcohol and Cetrimonium Chloride base, plus fruit acids (Tartaric Acid, Citric Acid) that keep the pH acidic.
→ Regeneration Therapy Mask 175 on cliCHair.ch
Sources
- Regulation (EC) No 1223/2009 on cosmetic products (EUR-Lex)
- European Commission CosIng database
- INCI list of Regeneration Therapy Mask 175, recorded from the packaging: product page on cliCHair.ch (recording method)
